XQ1146YB Well Servicing Power Tong

Brand

KING OIL

Guarantee Period

Response Time

6 - 24h

item

Name

UOM

Quantity

  • Product Information
  • Specifications
  • After-sale Protection
Product Introduction

XQ114/6YB well servicing power tong is a medium power tong used to for coupling makeup of the sucker rod thread in oil well servicing operation. The power tong has following features: 1. The new type of hydraulic backup and main tong are combined into a combined tong. By operating the manual reversing valve on main tong, the backup tong will be clamped automatically and the tubular column will be released flexibly and reliably. 2. Application of different jaw plates for main tong and backup tong can clamp tubular column and hoop of different specifications. The jaw plate can be conveniently installed and uninstalled. 3. The two gears have great speed change difference and the speed is high under high gear and the torque is large under low gear. 4. The power tong brake mechanism and steering control mechanism are set at the upper part of power tong. They have reliable performance and can be installed, adjusted and maintained conveniently. 5. The suspension main tong and backup tong float below main tong and the backup tong hose is connected with the main tong through connector. The main tong and backup tong can be combined for use and can also be separated for transportation. 6. Torque control system can be set to display, record and control the makeup torque.

 

Technical Parameters:

1. Applicable range mm (in.): Φ60~114(2 3/8″~4 1/2″); 2. High-gear maximum torque kN.m(Ibf.ft): 1.5(1106); 3. Low-gear maximum torque kN.m(Ibf.ft): 6.0(4425); 4. High-gear maximum speed r/min: 85; 5. Low-gear maximum speed r/min: 20; 6. Power head open end size mm(in.): 118(4.65); 7. Dimensions mm (in.): 850×500×600(33.5×19.7×26); 8. Transfer weight kg (Ib): 260(573); 9. Rated system pressure MPa(Psi): 12(1740); 10. Maximum oil supply volume L/min (gpm): 100(26.42).

After-sales Service
On-site installation with technological guidance,regular equipment inspection,and training.
We have marketing teams in regions where key accounts located,also we prepare special stock area in the local warehouses for key accounts.to timely provide necessary parts and consumable products.
Problem solving & Complaints settlement.
After-sales Procedures

(Customer Center)Apply
for after-sale service

Solutions released
within 48h

(Customer Center)Apply
Satisfaction survey

Respond within 24h

Execution of the solution

Specifications

Product attribute

Functional use
Accomplished Quality Control System:
To provide with all-around service of quality control, quality guarantee, and authority certification.
Warranty:
Warranty Validity: *** days
During the warranty period, for any products with quality problems, we will provide repair, replacement and return service.
After-sales Service:
On-site installation with technological guidance, regular equipment inspection, and training.
We have marketing teams in regions where key accounts located, also we prepare special stock area in the local warehouses for key accounts, to timely provide necessary parts and consumable products. Problem solving & Complaints settlement
After-sales Procedures:
(Customer Center)Apply
for after-sale service
Solutions released
within 48h
(Customer Center)Apply
Satisfaction survey
Respond within 24h
Execution of the solution
erui_email