Guide rail temperature transmitter

1 sku

Guide rail temperature transmitter

Technical parameters

1. Input: Thermocouple K-type, E-type, B-type, S-type, T-type, J-type, N-type RTD Pt100 Cu100 Cu50 (three-wire or four-wire system)
2. Output: Output 4~20ma DC signal within the range. Linear with the millivolt signal input by thermocouple; linear with the input resistance signal of the RTD. Or linear with temperature signal. As an isolation temperature transmitter, input and output phases are isolated with isolation voltage of 0.5KV, increasing resistance to common-mode interference, more suitable for use with computer networking.
3. Basic error: *±0.5% F・S
4. Transmission method: two-wire system
5. Display mode: (digital) LCD four-bit display, show a sign of e ... when open circuit of thermocouple occurs with output greater than 20mA
6. Working power: Min. voltage of transmitter working power is 12V, Max. voltage 35V, rated operating voltage 24V.
7. Load: Limit load resistance is calculated as follows:
RL (max)=50 (Vmin-12) (i.e. at 24V,
load resistance can be selected within 0~600Ω)
Rated load 250Ω.
8. Normal operating environment:
a) Ambient temperature: -25°C~80°C (Regular type)
-20°C~70°C (Digital display type)
b) Relative humidity: 5%~95%
c) Mechanical vibration: f≤50hz, amplitude <0.15mm
d) In ambient air, there is no corrosive medium for chromium, nickel coating, non-ferrous metals
and other alloys.
9. Impact of ambient temperature: ≤0.05/1°C
Note: "*" Contracted products with a tolerance error of ±0.2% can be provided if specially requested by customers.
10. Mount: regular type, dedicated type, wall mounted type and guide rail type

Executive standard

QB

Supply capability

Brand : HENGHE

Guarantee period : 12 months

Enquiry Now
RP1003-A High-precision Absolute Pressure Transmitter

1 sku

RP1003-A High-precision Absolute Pressure Transmitter

Technical parameters

1. Measured media: gas, steam, liquid
2. Measuring range (without transfer): 0-600Pa~40MPa
3. Precision: ±0.05%
4. Liquid receiving diaphragm: stainless steel 316L
5. Allowable service temperature: -40℃~85℃
6. Enclosure IP grade: IP67
7. Electrical connection: M20×1.5 or NPT1/2 internal thread, standard M20×1.5 nylon cable seal buckle, wiring terminal applicable to 0.5~2.5mm2 conductor
8. Process connection: NPT 1/2 internal thread, can be converted to NPT 1/2, G1/2 and M20x1.5 external thread, KF16 vacuum interface
9. Explosion-proof grade: Ex dⅡC T6 and Ex iaⅡC T4

Executive standard

Company standard

Supply capability

Brand : RKS

Guarantee period : 12 months from the date of delivery

Enquiry Now
RP1003-S Sanitary Absolute Pressure Transmitter

1 sku

RP1003-S Sanitary Absolute Pressure Transmitter

Technical parameters

1. Measured media: gas, steam, liquid
2. Measuring range: 0-2kPa~3MPa
3. Precision: ±0.01%
4. Liquid receiving diaphragm: stainless steel 316L
5. Allowable service temperature: -40℃~85℃
6. Enclosure IP grade: IP67
7. Electrical connection: M20X1.5 cable seal buckle, wiring terminal applicable to 0.5~2.5mm2 conductor
8. Process connection: DN25/DN40/DN50/DN76.1 sanitary interface

Executive standard

Company standard

Supply capability

Brand : RKS

Guarantee period : 12 months from the date of delivery

Enquiry Now
RT2001-Thermistor Temperature Transmitter

1 sku

RT2001-Thermistor Temperature Transmitter

Technical parameters

1. Measured media: gas, steam, liquid
2. Measuring range: -50~﹢250℃
4. Allowable service temperature: -20~﹢100℃
5. Enclosure IP grade: IP65

Executive standard

Company standard

Supply capability

Brand : RKS

Guarantee period : 12 months from the date of delivery

Enquiry Now
Pressure transmitter (direct mounting type)

1 sku

Pressure transmitter (direct mounting type)

Technical parameters

1. Measurement range: 8.125-50000kPa;
2. Accuracy: ±0.1% or ±0.065%;
3. Isolation diaphragm material: SUS316L, Hastelloy C;
4. The temperature range of the wetted part: -45~350 °C;
5. Output signal: DC4-20mA;
6. Communication protocol: Fuji Protocol, FF and HART protocols;

Executive standard

ISO9001:2008 GB/T 190012008

Supply capability

Brand : LANLIANFUJI

Guarantee period : 12 months from the date of delivery

Enquiry Now
QYB102 series pressure transmitter

7 sku

QYB102 series pressure transmitter

Technical parameters

1.Measured medium: liquids and gases;
2.Pressure measuring range: -0.1~0~100MPa;
3.Precision grade: 0.2%;
4.Overload pressure: 200% F.S;
5.Display mode: 4 digits LED;
6.Display range: -1999~9999;
7.Signal transmission: 4-20mA/RS485;
8.Operating power source: 18-36VDC;
9.Operating ambient temperature: -20℃~70℃;\
10.Operating ambient humidity: ≤80% RH;
11.Installation thread: M20*1.5.

Executive standard

GB/T17614.2-2015

Supply capability

Brand : KADUN

Guarantee period : 12 months

Enquiry Now
300LB flange type level transmitter

1 sku

300LB flange type level transmitter

Technical parameters

1. Flange specification: 3" and 4"
2. Flange rating: 150LB and 300LB

Executive standard

enterprise standard

Supply capability

Brand : HENGHE

Guarantee period : 12 months

Enquiry Now
Pressure Transmitter

3 sku

Pressure Transmitter

Technical parameters

1. Sensor-Measurement Range (Pa): 0-200~1000, 0-600~6000 0-400~40000,0-2500~250000,0-30000~300000.
2. Membrane Material/Filling Liquid: 316L SS/si-oil, 316L SS/inert oil, Hastelloy C/ inert oil, Monel/ inert oil.
3. Connection: Vacuum Clamp, 1/2"NPT female thread, 1/2"NPT male thread (containing 1/4"NPT), M20x1.5 male thread, G1/2 male thread, 1/4"NPT male thread.
4. Transmitter Enclosure material/ electrical connection: Alloy/ 1/2 NPT female thread, alloy/ M20x1.5 female thread, 316L SS/ 1/2 NPT female thread, 316L SS/ M20x1.5 female thread.
5. Optional Output: 4-20mA/HART, PROFIBUS-PA, FOUNDATION Fieldbus.

Executive standard

IEC60068-2-27,EN61326.

Supply capability

Brand : H&B

Guarantee period : 12 Months from selling.

Enquiry Now
Pressure transmitter

1 sku

Pressure transmitter

Technical parameters

1.Range: 0-3m,2.output: 4-20mA,3. power supply 24VDC,4. precision: 0.075% sensor diaphragm,5.material: 316L,
6. flange specification DN50,
7. flange material 304,
8. capillary: 3 meter ,
9.liquid crystal display,
10. HART agreement.

Executive standard

Q/BSD01-2014

Supply capability

Brand : BAISSDE

Guarantee period : 12 Months

Enquiry Now
1MPa Sensor Diaphragm, Meterial 316, LCD, pressure transmitter

1 sku

1MPa Sensor Diaphragm, Meterial 316, LCD, pressure transmitter

Technical parameters

1. Range: 0-1MPa;
2. Output: 4-20mA Power Supply: 24VDC;
3. Accuracy: 0.075%;
4. Sensor Diaphragm Material: 316L; 5. LCD 6. HART agreement.
7. Customized products according to customers' requirements.

Executive standard

Q/BSD01-2014

Supply capability

Brand : BAISSDE

Guarantee period : 12 Months

Enquiry Now