Hydraulic Overturning Aluminium Ingot Clamp

2 sku

Hydraulic Overturning Aluminium Ingot Clamp

Technical parameters

1. Rated load (t): 20~30;
2. Applicable aluminium ingot range A (mm) : 900~1630,1500~2100;
3. Maximum outer dimension L (mm): 3200,3680;
4. Maximum outer dimension B (mm): 1600;
5. Maximum outer dimension H (mm): 2570;

Executive standard

YB/T089-2013

Supply capability

Brand : J&L

Guarantee period : Comply with scrapping standards

Enquiry Now
3DY3B Electric Pressure Testing Pump Model 3DY-6500(45)

1 sku

3DY3B Electric Pressure Testing Pump Model 3DY-6500(45)

Technical parameters

1. Speed (min-1): 502;
2. Plunger stroke (mm): 70;
3. Rated displacement pressure (MPa): 15-150;
4. Flow (L/h): 1500-15000;
5. Plunger diameter (mm): 18-55.

Executive standard

Company standard

Supply capability

Brand : JET

Guarantee period : 12 months from the date of delivery

Enquiry Now
ZS010406 Synthetic Fiber Tightener

4 sku

ZS010406 Synthetic Fiber Tightener

Technical parameters

1. In conformity with CE and GS safety requirements;
2. Material: high strength polyester (100% PES), nylon.
3. Safety factor: 6:1 or 8:1.
4. Extension: < 2% - 5% under the limit working force;
5. Length: 8 m standard and 1-50 m optional.

Executive standard

JB/T8521

Supply capability

Brand : GAOSHEN

Guarantee period : 12 months

Enquiry Now
3DY3B Electric Pressure Testing Pump Model 3DY-9500(30)

1 sku

3DY3B Electric Pressure Testing Pump Model 3DY-9500(30)

Technical parameters

1. Speed (min-1): 502;
2. Plunger stroke (mm): 70;
3. Rated displacement pressure (MPa): 15-150;
4. Flow (L/h): 1500-15000;
5. Plunger diameter (mm): 18-55.

Executive standard

Company standard

Supply capability

Brand : JET

Guarantee period : 12 months from the date of delivery

Enquiry Now
Explosion-Proof Counterbalance Electric Forklift Truck

6 sku

Explosion-Proof Counterbalance Electric Forklift Truck

Technical parameters

1. Load center distance (mm): 500.
2. Rated load (kg): 000-5000.
3. Maximum hoisting height (mm): 3000.
4. Maximum traction force (N): 11000.
5. Minimum turning radius (mm): 1960-2557.
6. Wheel base (mm): 1380-1800.

Executive standard

GB 3836.2-2010 GB 3836.4-2010 GB 19854-2005 GB 12476.1-2000 GB 12476.2-2006

Supply capability

Brand : ESL

Guarantee period : no warranty

Enquiry Now
Wheel Loader

9 sku

Wheel Loader

Technical parameters

Bucket capacity: 0.5~3.5m³.
Rated load: 1000~6000kg.
Unloading height: 2660~3250mm.
Unloading distance: 855~1280mm.
Swing arm lifting time: 4.5~6.8s.
Max. running speed: 17~38km/h.
Max. breakout force: 34~195kN.
Max. traction: 30~180kN.
Max. gradeability: 25°~30°.
Min. turning radius: 5500~6630mm.
Turning angle: 35°.
Min. ground clearance: 220~544mm.
Axle spacing: 1900~3200mm.
Wheel spacing: 1400~2264mm.

Executive standard

JB/T 3688.2-1998 ISO7131:2009.

Supply capability

Brand : YINENG

Guarantee period : 6-12 Months

Enquiry Now
DG953 Loader

1 sku

DG953 Loader

Technical parameters

1. Bucket capacity (m³): 3
2. Highest velocity (km/h): 38.
3. Rated load (T): 5.
4. Rated load lifting during action time of working device (s):≤5.7.
5. Three actions and time of working device (s): ≤10.2.
6. Bucket outside at min. turning radius: 6970.
7. Engine No.: WD10G220E23.
8. Rated power (kw): 162.
9. Rated speed (r/min): 2000.
10. Operation weight (kg): 16800.
11. Wheelbase (mm): 2920.
12. Wheel-center-distance (mm): 2250.
13. Max. excavation force (KN): 155.
14. Max. traction force (KN): 150.
15. Bucket automatic leveling: Yes.
16. Traveling brake: Manual flexible shaft brake + gas cap oil clamp disc brake.
17. Steering angle: 35±10.
18. Unloading height (mm): 3417,3600.
19. Unloading distance (mm): 1050, 1120.
20. Overall dimension (length x width x height) (mm): 7976×3026×3498.

Executive standard

Supply capability

Brand : DEGONG

Guarantee period : 1. 1 year since delivery of the completely built vehicle (excluding engine) or use of 2000 hours after arrival, whichever comes first. 2. Engine warranty shall take the warranty document provided by engine manufacturer as standard.

Enquiry Now
DG965-Ⅱ Loader

1 sku

DG965-Ⅱ Loader

Technical parameters

1. Standard bucket capacity (m³): 3.
2. Max. running speed (km/h): 38.
3. Rated load (t): 6.
4. Operating weight (t): 19.5.
5. Total operate time of the device (s): 12.
6. Engine model: WD10G240E21.
7. Engine type: vertical water-cooled four-stroke direct injection type.
8. Rated power of engine (kw): 175.
9. Min. fuel consumption (g/kwh): 225.
10. Rated rotational speed (r/min): 2200.
11. Oil consumption: 0.7.
12. Starting mode: electric start.
13. Swing arm lifting time (S):6.
14. Fuel capacity (L): 230.
15. Dimension (LxWxH) mm: 8351×3082×3480.
16. Max. breakout force (t): 18.5.
17. Max. traction (t): 16.7.
18. Bucket automatic flat: Yes.
19. Travel brake: manual gas brake+gas-oil caliper disk brake.
20. Axle spacing (mm):3200.
21. Wheel spacing (mm):2250.
22. Unloading height (mm): 3238.
23. Unloading distance (mm): 1218.
24. Max. gradeability (°): 30.

Executive standard

Supply capability

Brand : DEGONG

Guarantee period : 1. One year after the loader (except for engine) leaves the factory or 2000 hours after using, whichever comes due at first. 2. Warranty period of engine shall be subject to the warranty document provided by the manufacturer.

Enquiry Now
DG938NGIII Underground Loader

1 sku

DG938NGIII Underground Loader

Technical parameters

1. Operating weight (KG): 10500.
2. Standard bucket capacity (M³): 1.7/2.2/1.5.
3. Rated load (KG): 3000.
4. Maximum traction force (KN): 110.
5. Maximum grabbing force (KN) 105.
6. Maximum dumping height standard arm (mm): 2875.
7. Maximum dumping height standard arm (mm): 955.
8. Wheel tread (mm): 1856.
9. Wheel base (mm): 2700.
10. Overall dimension (lengthxwidthxheight) (mm): 7240x2484x3235.
11. Minimum turning radius of bucket (mm): 5920.
12. Minimum turning radius of front wheel (mm): 5100.
13. Minimum ground clearance (mm): 340.
14. Engine model: WP6G125E333.
15. Rated power (KW): 92.
16. Rated rotating speed (r/min): 2000.
17. Emission standard: GB -III.
18. Maximum speed (KM/H): 37.
19. Rated specific fuel consumption (g/Kw.h): ≤193.8.
20. Steering angle (º): ±35.
21. Working pressure of hydraulic system (MPa): 16.
22. Rated hoisting time of lift arm (s): 5.1.
23. Sum of working device action time (s): 9

Executive standard

Supply capability

Brand : DEGONG

Guarantee period : 1. One year after ex-factory of whole vehicle (except for engine) or 2000 hours after being put into service, whichever is earlier. 2. The quality guarantee of engine shall be subject to warranty documents provided by manufacturer.

Enquiry Now
Screw Conveyor

6 sku

Screw Conveyor

Technical parameters

1. Driving power (kW): 7.5~22.
2. Conveying distance L(m): 6~12.
3. Conveying angleα(°): ≤45.
4. Conveying capacity (t/h): 60~110.

Executive standard

JB/T 7679-2008

Supply capability

Brand : FYG

Guarantee period : 12 Months after leaving the factory

Enquiry Now