ZDLP Electric single-seat regulating valve

10 sku

ZDLP Electric single-seat regulating valve

Technical parameters

Attached diagram

Executive standard

GB/T 26155-2010

Supply capability

Brand : KAILI

Guarantee period : 12 months

Enquiry Now
HH-304 comprehensive calibration simulator

1 sku

HH-304 comprehensive calibration simulator

Technical parameters

1. Measurement signals: Voltage (min. resolution 1uV), current (min. resolution 1uA), resistance (min. resolution 0.01Ω), frequency (min. resolution 0.01Hz), thermocouple and thermal resistance.
2. Range: Voltage (0-±50V, 0-±99.999mV optional)
3. Thermocouple measurement and simulation supporting type: B, R, S, N, K, E, J and T
4. Thermal resistance measurement and simulation supporting type: Pt100, Pt10, Cu100 and Cu55
5. Measurement and simulation precision level: Voltage 0.02%F.S

Executive standard

Enterprise standard

Supply capability

Brand : HENGHE

Guarantee period : 12 months since leaving the warehouse

Enquiry Now
Standard WYC Stress Test System

7 sku

Standard WYC Stress Test System

Technical parameters

1. Control accuracy (%): 0.5-1;
2. Frequency conversion range (Hz): 10-50.

Executive standard

Corporate Standard

Supply capability

Brand : JET

Guarantee period : for 12 months after delivery

Enquiry Now
Explosion-proof Control Box

1 sku

Explosion-proof Control Box

Technical parameters

1. Part of: Degasser;
2. Material: Steel;
3. Ex degree: ExdⅡBT4.

Executive standard

SY/T 5612-2007

Supply capability

Brand : TSC

Guarantee period : 12 Months from Ex-factory

Enquiry Now
ConST115 Portable Pneumatic Pump

1 sku

ConST115 Portable Pneumatic Pump

Technical parameters

1. Use environment: work field or laboratory;
2. Pressuring range: -95~+400 kPa;
3. Adjusting fineness: 0.01 Pa;
4. Pressuring mode: manual;
5. Pressure transmitting medium: air
6. Pressure connection: 2 pieces of M20*1.5 quick connection internal threads.

Executive standard

JB/T599-2005

Supply capability

Brand : ConST

Guarantee period : 12 months

Enquiry Now
ConST165 Gas Pressure Regulator Calibrator

1 sku

ConST165 Gas Pressure Regulator Calibrator

Technical parameters

1. Inlet end pressure: 25 MPa;
3. Adjusting fineness: 1 kPa;
3. Outlet end pressure: 4 MPa;
3. Adjusting fineness: 0.1 kPa;
5. Pressure transmitting medium: air;
6. Pressure connection: 2 pieces of M20*1.5 quick connection internal threads.

Executive standard

JJF 1328-2011

Supply capability

Brand : ConST

Guarantee period : 12 months

Enquiry Now
HHY-200A Precision Digital Pressure Gauge

1 sku

HHY-200A Precision Digital Pressure Gauge

Technical parameters

1. Conditions of use: Power: External 220VAC 50Hz built-in: 6V Ni-MH (lithium ion) battery
2. Temperature: 20+-2°C (accuracy may drop when exceeding the temperature range)
3. Humidity: 0-80%RH
Environment: Free of dust and corrosive gas
4. Pressure interface: External sensor: M20*1.5
5. Built-in sensor: M10*1 quick connector

Executive standard

QB

Supply capability

Brand : HENGHE

Guarantee period : 12 months

Enquiry Now
YH2088 (2088B) Throw-in Type Level Transmitter

3 sku

YH2088 (2088B) Throw-in Type Level Transmitter

Technical parameters

1. Measurement form and range: 0~1~200 m H2O.
2. Permitted overload: 2 times full-range pressure.
3. Working temperature: -20~60 ℃, temperature compensation: -10~70 ℃, storage temperature: -40~80 ℃.
4. Precision: 0.25% FS (typical), 0.5% FS (Max.).
5. Output signal: 4~20 mA (two/three-wire system), 0~10/20 mA, 0~5V, 1~5V, 0~10V.
6. Power supply: 15~36 VDC (rated voltage 24 VDC).
7. Casing material: aluminum alloy.
8. Membrane: 316L stainless steel.
9. Protection grade: IP68 (pressure sensor), IP65 (junction box transmitter).

Executive standard

Supply capability

Brand : YAHU

Guarantee period : no warranty

Enquiry Now
MSLT-1(MS-1) Water-temperature and Flow Display Alarm

1 sku

MSLT-1(MS-1) Water-temperature and Flow Display Alarm

Technical parameters


Executive standard

Q/JMD 16-2016 Q/JMD05-2015

Supply capability

Brand : MIND

Guarantee period : 12 Months

Enquiry Now
OWC-9040 Series Supercharging Thickener

4 sku

OWC-9040 Series Supercharging Thickener

Technical parameters

1. Maximum operating temperature: 250℃;
2. Maximum operating pressure: 200 MPa;
3. Consistence measuring range: 0-100 Be;
4. Consistence resolution: 1 Be;
5. Heat transfer medium: special thickening oil (white mineral oil);
6. Air pressure: 0.4-0.7 MPa;
7. Water pressure: 0.2-0.6 MPa;
8. Input power: 220V/50HZ/4.5-9 kw;
9. Heater power: 4 kw;
10. Slurry cup speed: 150 ± 15 RPM, 3-300 RPM;
11. Carried standard: API Spec.10 / GB10238.

Executive standard

GB10238

Supply capability

Brand : OWC

Guarantee period : 12 months

Enquiry Now