Product characteristics

scale range (mpa)
joint thread
scale range (kpa)
nominal diameter (mm)
accuracy class
nominal pressure (mpa)
shell material
instrument diameter (mm)
negative pressure (kpa)
positive and negative pressure (kpa)
positive pressure (kpa)
control form
connector material
caliber
dial diameter (mm)
electrode material
installation way
accuracy
structure type
accuracy level
4.0MPa smart vortex precession flowmeter

1 sku

4.0MPa smart vortex precession flowmeter

Technical parameters

1. Nominal diameter DN (mm): 20-200
2. Flow scope (m3/h): 1.2-3600
3.Pressure grade: 1.6-4.0MPa
4. Correctness level: 1.0,1.5

Executive standard

GB/T 25922-2010

Supply capability

Brand : HENGHE

Guarantee period : 12 months

Enquiry Now
target flowmeter

1 sku

target flowmeter

Technical parameters

Measurement scope: 0-400t/h
Accuracy grade: 0.5%FS l.O%FS 2.0%FS
Output: linear relation between 4-20mA two-wire system output and flow;
Power supply voltage: 12-36VDC
Nominal pressure: 1.6, 2.5, 4.0、 6.4MPa
Ambient temperature: -30℃-60℃ (special: -40℃-80℃)
Medium temperature: common type ≤100℃ (without heat sink)
High temperature ≤400℃
Cable interface: M20*1.5 (internal thread)
Level of protection: IP65
Load performance: the maximum load resistance=50*(power voltage-12)= 6000@24V
Alarm output: collector open-circuit type; the maximum input current of lOOmA
The maximum switch voltage of 30VDC with the deviation band control
Impulse output: the minimum impulse width of 50ms with the dual-circuit output to the accumulated current;
Display value: 50000units with the automatic reset
Damping time: 1~100s, adjustable randomly
Form of explosive protection; mark of explosion protection, and certificate number of explosion protection

Executive standard

GB/T 25922-2010

Supply capability

Brand : HENGHE

Guarantee period : 12 months

Enquiry Now
RF3001-DP Mass Flowmeter

3 sku

RF3001-DP Mass Flowmeter

Technical parameters

1. Measured media: liquid
2. Flow measuring range: 0-1~40t/h
3. Precision: ±0.3%, ±0.5%, ±1%
4. Liquid receiving diaphragm: stainless steel 316L
5. Parameters: flow, pressure, temperature
6. Enclosure IP grade: IP67
7. Electrical connection: M16X1.5 waterproof aviation socket, wiring terminal applicable to 0.5~2.5mm² conductor

Executive standard

Company standard

Supply capability

Brand : RKS

Guarantee period : 12 months from the date of delivery

Enquiry Now
Normal level 0.2 large-diameter oval gear flowmeter

1 sku

Normal level 0.2 large-diameter oval gear flowmeter

Technical parameters

★ Intrinsically safe explosion prevention: ExiaⅡCTSdⅡBT4
★ Connection method: Flange connection: DN10~DN100
Threaded connection: DN10~DN50
★ Installation method: Horizontal and vertical
★ Diameter series: DN10, 15, 20, 25, 40, 50, 80 and 100
★ Pressure loss: ≤ 0.1MPa
★ Precision level: Normal level 0.5, high precision level 0.2
★ Medium pressure: Normal 1.6MPa, high pressure type 3.2MPa
★ Viscosity range: Normal 0.6~200mpa.s,
High viscosity 200~1000mpa.s
★ Medium temperature: Normal<120℃, high pressure type<200℃
★ Bulk material: Cast steel, stainless steel etc.
★ Rotating parts: Aluminum alloy, stainless steel etc.

Executive standard

Enterprise standard

Supply capability

Brand : HENGHE

Guarantee period : 12 months

Enquiry Now
sanitary electromagnetic flowmeter

1 sku

sanitary electromagnetic flowmeter

Technical parameters

1.Measured liquid: conducting liquid, serum
2Measurement accuracy: tubular, ±0.5%,±0.3%,±0.2
3.Repeatness: tubular, 0.17%, 0.1%, 0.07%
4.Rated pressure: 1.0MPa,1.6MPa,4.0MPa
5.Special pressure: to be customized
6.Medium temperature: Class E, 0-60℃;
7.Electrode form: standard fixed-type
8.Sensor type: tubular electromagnetic flowmeter
9.Caliber: tubular flange type, DNlO-DN3000
10Structure material: electrode: 316L, lead (pt), HB (HB, HC), tantalum (Ta), titanium (ti), tungsten carbide (WC);
Lining: CR (chloroprene rubber), PU (Polyurethane rubber), F4 (PTFE), F46 (FEP),PFA, KCB(special-customized high-temperature lining)
Gauging pipe: stainless steel
Flange: carbon steel (normal); stainless steel (optional)
Meter body: carbon steel (normal); stainless steel (optional)
Header: press-film cast aluminum
Power supply: supply by 3.6V lithium battery
3.6V lithium battery, and 24V DC dual power; 3.6V and 220V dual power
Electrical interface: Ml6Xl.5
Level of protection: IP68
Electrodeplate press: 2-6 pc
Flow direction: forward and reverse
Ambient temperature: -25~50°C
Storage temperature: -40~60°C
Relative humidity: 5-90%
Alarm: blank pipe, excitation, upper and lower limit

Executive standard

JB/T 9248-2015

Supply capability

Brand : HENGHE

Guarantee period : 12 months

Enquiry Now
Smart vortex flowmeter

1 sku

Smart vortex flowmeter

Technical parameters

1. Measurement medium: steam, compressed air, coal gas, medium-high speed medium in liquid
2.
Caliber and connection method of meter: DN15-300 connected by flange or clamp
DN300-2000 connected by the plug-in type;
2. Accuracy level: liquid: ±1.0% (tubular); ±2.0% (plug-in)
Gas or steam: ±1.5% (tubular); ±2.5% (plug-in)

4.Repeatness: liquid: ≤0.2%
Gas or steam: ≤0.5%
5.Range ratio: 1:10-1:20
6.Usage conditions:
Medium temperature:
T1 (normal temperature)-40-150℃
T2 (normal temperature)-40-250℃
T3 (normal temperature)-40-320℃
Ambient temperature: -20℃~60℃
Relative humidity: 5%~90%
Atmosphere pressure: 86KPa~106KPa
7.Housing material: stainless steel or carbon steel
8.Nominal pressure: standard sensor 1.0MPa-4.0MPa
High-voltage sensor: 6.3MPa-42MPa special order

Executive standard

GB/T 25922-2010

Supply capability

Brand : HENGHE

Guarantee period : 12 months

Enquiry Now
Continuous Roller Bearing Flowmeter

1 sku

Continuous Roller Bearing Flowmeter

Technical parameters

1. Temperature: 175℃(350℉).
2. Pressure: 15000psi (103MPa).
3. Output: 10 pulses/r, directional.
4. Startup Threshold Value:
Water: 2.43m/min (8.0ft/min).
Light oil: 2.59m/min (8.5ft/min).
Heavy oil: 3.81m/min (12.5ft/min).
Air: 5.48m/min (18.0ft/min).
5. Max. Flow Rate: 609.6m/min (2000 ft/min).

Executive standard

Q/WS 001-2015

Supply capability

Brand : WELL-SUN

Guarantee period : 12 Months from Ex-factory warehouse.

Enquiry Now
Smart ultrasonic flowmeter

1 sku

Smart ultrasonic flowmeter

Technical parameters

1.Measurement medium: water, sea water, industrial sewage, acid and alkali liquid,
2. Oil liquid and other ultrasonic conducting liquid
3. Scope of flow rate: 0-32m/s
4.Measurement accuracy: more than ±1

Executive standard

Enterprise standard

Supply capability

Brand : HENGHE

Guarantee period : 12 months

Enquiry Now
Ultrasonic Flowmeter

1 sku

Ultrasonic Flowmeter

Technical parameters

1. Nominal diameter: DN100;
2. Nominal pressure: 1.6Mpa;
3. IP code: IP65.

Executive standard

GB/T 18604-2014

Supply capability

Brand : YINUO

Guarantee period : 6 Months

Enquiry Now
High pressure electromagnetic flowmeter

3 sku

High pressure electromagnetic flowmeter

Technical parameters

1. Caliber: DN25~DN200;
2. Accuracy: ±0.2% 、±0.5%;
3. Pressure grade: PN10MPa~PN42MPa;
4. Installation form: flange connection;
5. Lining materials: PFA, polyurethane,F46 ;
6, Explosion-proof grade: Exd Ⅱ CT5;
7. Protection level: IP65、IP68.

Executive standard

Q/SYFSB 0002-2017

Supply capability

Brand : FISHERMETER

Guarantee period : 1 year after production

Enquiry Now