1. Rated voltage/rated frequency: AC 400V (three-phase)/50Hz±15%
2. Maximum impulse current value: 12KA
3. Absorption frequency (filter performance): 3KHz~10MHz
4. Leakage current (filter performance): 1.2mA
5. Installation method: three-phase: 35mm (guide rail installation)
6. Installation dimension: 126x105x80 (lengthxdepthxheight)
7. Surge resistance current: for 300V impulse voltage, impulse current shall not exceed 1000A
8. Circuit connection mode: star type
9. Insulation resistance: ＞100MΩ
10. Withstanding voltage: 2000VAC between current-carrying part and casing for 1min, without breakdown or flashover
11. Power supply: power is less than 1.0w.
temperature rise is less than10℃
12. External interface: terminal
13. Casing type: flame retardant plastic
14. Maintenance mode: maintenance-free
15. Service life: over 15 years
16. Working temperature: -30℃-70℃
17. Storage temperature: -40℃-85℃
18. Relative humidity:﹤85% (Between 15℃ and 25℃)
19. Atmospheric pressure: 52-110Kpa
20. Working environment: without explosive, corrosive gas, conductive dust, violent vibration, impact source and below the altitude of 1500m.
1. Wiring method: three-phase three-wire or three-phase four-wire
2. Input votage: 3×380V ±10%.
3. Input frequency: 50Hz ±2%.
4. Transient response time:100 μs.
5. Switching frequency: 10kHz~20kHz.
6. Function set: compensate harmonic current, only compensate reactive current, compensate harmonic current and reactive current.
7. Times for harmonic compensation: 2-51 times.
8. Protection type: DC over-voltage protection, IGBT over-current protection and device overheat protection.
9. Cooling method: forced air cooling.
10. Noise: ＜ 65dB.
11. Working temperature: -10℃～+45℃ (reduce the capacity if ambient temperature exceeds the working temperature).
12. Working humidity: ＜85%RH not condense.
13. Installation: indoor installation.
14. Elevation: ≤1000 m (reduce capacity at high elevation).
15. Inlet and outlet: according to customer's requirements.
16. Protection degree :IP20.
17. Intelligent communication interface: module.
18. Remote monitoring: optional.
19. Mounting mode: upright mounted, wall mounted and drawer mounted.
20. Compensation current: upright mounted: 50A, 75A, 100A, 150A, 200A, 250A, 300A. wall mounted: 30, 50, 75, drawer mounted: 30, 50, 75.