HSY1 H Frequency Meter

3 sku

HSY1 H Frequency Meter

Technical parameters

1. Meter frame specification: 2-120mm×120mm (42 square),
3-80mm×80mm (80 square), 9-96mm×96mm (96 square) and D-48mm×48mm (square);
2. Display mode: 1 - single-row digital tube display, 2 - dual-row digital tube display, 3 - three-row digital tube display and Y - liquid crystal display (LCD).
3. The product series: J - basic digital display electric measuring meter, X - digital display electric measuring meter and K - programmable digital measuring meter

Executive standard

GB188021

Supply capability

Brand : HANGSHEN ELECTRIC

Guarantee period : 12 months

Enquiry Now
Multi-User Electric Energy Meter

2 sku

Multi-User Electric Energy Meter

Technical parameters

Refer to attached drawings for more information.

Executive standard

Supply capability

Brand : Acrel

Guarantee period : no warranty

Enquiry Now
carbon steel Test piles

1 sku

carbon steel Test piles

Technical parameters

1. Size (diameter X length X wall thickness (length X width X height) mm): Φ108X2000X4;
2. Material: carbon steel

Executive standard

Supply capability

Brand : HONGKUN

Guarantee period : 12 Months

Enquiry Now
HHG-01A Intelligent Handheld Signal Generator

1 sku

HHG-01A Intelligent Handheld Signal Generator

Technical parameters

1. Voltage output: 0-5V DC;
2. Voltage measurement: 0-10V DC;
3. Current output: 0-20mA DC;
4. Current measurement: 0-20mA DC;
5. 24V loop voltage output: negative 30mA;
6. Precision: 0.05%FS±1d;
7. Temperature drift: ±0.01%C, range of application 0-50℃, operating temperature range <90%RH, storage temperature range -10-80;
8. Power supply: removable nickel-hydrogen battery pack, continuous working time after recharging > 8 hours, one DC12V1A outlet switch power supply set outside.

Executive standard

Enterprise standard

Supply capability

Brand : HENGHE

Guarantee period : 12 months after the ex-warehouse date

Enquiry Now
ANAPF Active Power Filter

8 sku

ANAPF Active Power Filter

Technical parameters

1. Wiring method: three-phase three-wire or three-phase four-wire
2. Input votage: 3×380V ±10%.
3. Input frequency: 50Hz ±2%.
4. Transient response time:100 μs.
5. Switching frequency: 10kHz~20kHz.
6. Function set: compensate harmonic current, only compensate reactive current, compensate harmonic current and reactive current.
7. Times for harmonic compensation: 2-51 times.
8. Protection type: DC over-voltage protection, IGBT over-current protection and device overheat protection.
9. Cooling method: forced air cooling.
10. Noise: < 65dB.
11. Working temperature: -10℃~+45℃ (reduce the capacity if ambient temperature exceeds the working temperature).
12. Working humidity: <85%RH not condense.
13. Installation: indoor installation.
14. Elevation: ≤1000 m (reduce capacity at high elevation).
15. Inlet and outlet: according to customer's requirements.
16. Protection degree :IP20.
17. Intelligent communication interface: module.
18. Remote monitoring: optional.
19. Mounting mode: upright mounted, wall mounted and drawer mounted.
20. Compensation current: upright mounted: 50A, 75A, 100A, 150A, 200A, 250A, 300A. wall mounted: 30, 50, 75, drawer mounted: 30, 50, 75.

Executive standard

Supply capability

Brand : Acrel

Guarantee period : no warranty

Enquiry Now
Multi-user Metering Box

1 sku

Multi-user Metering Box

Technical parameters

1. Working Voltage Range: 220V±20%AC.
2. Reference Frequency: 50Hz.
3. Power Consumption: <10VA.
4. Interface: RS485(A+, B-), Ethernet.
5. Medium: Shielded twisted pair.
6. Protocol: DL/T645 agreement.
7. Working temperature: -20℃-60℃.
8. Storage temperature: -25℃-70℃.
9. Moisture: ≤95% (no dewing).
10. Altitude: <2000m.

Executive standard

Supply capability

Brand : Acrel

Guarantee period : no warranty

Enquiry Now
HSY1 D Multi-functional Electrical Measuring Meter

12 sku

HSY1 D Multi-functional Electrical Measuring Meter

Technical parameters

1. Meter frame specification: 2-120mm×120mm (42 square),
3-80mm×80mm (80 square), 9-96mm×96mm (96 square) and D-48mm×48mm (square);
2. Display mode: 1 - single-row digital tube display, 2 - dual-row digital tube display, 3 - three-row digital tube display and Y - liquid crystal display (LCD).
3. The product series: J - basic digital display electric measuring meter, X - digital display electric measuring meter and K - programmable digital measuring meter

Executive standard

GB188021

Supply capability

Brand : HANGSHEN ELECTRIC

Guarantee period : 12 months

Enquiry Now
Automatic measurement digital multimeter

1 sku

Automatic measurement digital multimeter

Technical parameters

/

Executive standard

/

Supply capability

Brand : SHEFFIELD

Guarantee period : /

Enquiry Now
High-voltage Test Pencil

1 sku

High-voltage Test Pencil

Technical parameters

/

Executive standard

/

Supply capability

Brand : SHEFFIELD

Guarantee period : /

Enquiry Now
Portable Copper Sulfate Reference Electrode

1 sku

Portable Copper Sulfate Reference Electrode

Technical parameters

1. Electrode impedance: 200Ω~1.6kΩ;
2. Temperature coefficient: 0.9-1.0mv/℃.

Executive standard

GB/T467-1997

Supply capability

Brand : Like

Guarantee period : 12 months

Enquiry Now