1.6 MPa Electronic Electric Single-seat Regulating Valve

1 sku

1.6 MPa Electronic Electric Single-seat Regulating Valve

Technical parameters

1. Nominal diameter (mm): 20-300
2. Valve seat diameter (mm): 10-300
3. Flow coefficient Kv: linear type 1.8-1,200, equal percent 1.6-1,050
4. Adjustable scope: 30:1, 50:1
5. Nominal pressure: 1.6 and 6.4 MPa for standard products and 10, 22, and 32 MPa for special ordering goods
6. Flow characteristics: equal percent, linear type
7. Rated travel (mm) : 16-60
8. Valve core form: single-seat plunger type
9. Mode of action: electrically open and electrically closing
10. Control signal: 4-20A.DC; 1-5V.DC; 0-10V. DC (relating to the actuator configured)
11. Power supply: 220V.AC, 50Hz; 380V.AC, 50Hz (relating to the actuator configured)
12. Operating temperature: common type +40~+230℃, fin type +230~+450℃, special ordering goods +450~+600℃
13. Flange standard: JB78-59, JB79-59, or to be ordered as per JB/T79.1-94, JB/I79.2-94, HG20592-2009, ANSI, JIS, DIN, etc

Executive standard

JB/T7387-2014

Supply capability

Brand : HENGHE

Guarantee period : 12 months

Enquiry Now
Manual Self-operated Pressure Regulating Valve Group

1 sku

Manual Self-operated Pressure Regulating Valve Group

Technical parameters

Single loop: KC8305-1 self-operated pressure regulating valve group
Applicable medium: all kinds of gases and liquids
Use temperature: -30~+350℃
Maximum inlet pressure: 6.4 MPa
Maximum export pressure: 4.0 MPa
Maximum flow coefficient (KV): 1,750
Pressure regulating valve diameter: 15-300 mm
High precision: 5%
Closing pressure: ±5% ~+10%
Filtration: filter and gas-liquid shunt
Pressure regulation: single-loop, double-loop, and multi-loop systems
Overpressure protection: overpressure relief or backflow
Switch valve: manual, pneumatic, and electric valves

Executive standard

Company standard

Supply capability

Brand : HENGHE

Guarantee period : 12 months

Enquiry Now
Electric Self-operated Regulating Valve Group

1 sku

Electric Self-operated Regulating Valve Group

Technical parameters

Single loop: KC8305-1 self-operated pressure regulating valve group
Applicable medium: all kinds of gases and liquids
Use temperature: -30~+350℃
Maximum inlet pressure: 6.4 MPa
Maximum export pressure: 4.0 MPa
Maximum flow coefficient (KV): 1,750
Pressure regulating valve diameter: 15-300 mm
High precision: 5%
Closing pressure: ±5% ~+10%
Filtration: filter and gas-liquid shunt
Pressure regulation: single-loop, double-loop, and multi-loop systems
Overpressure protection: overpressure relief or backflow
Switch valve: manual, pneumatic, and electric valves

Executive standard

Company standard

Supply capability

Brand : HENGHE

Guarantee period : 12 months

Enquiry Now
JLG103 fixed throttle valve

5 sku

JLG103 fixed throttle valve

Technical parameters

1. The throttle oil nozzle is made of ceramic or hard alloy, with abrasion and scouring resistance performance.
2. The valve deck is connected through union, ensuring convenient replacement of oil nozzle.
3. Working pressure: 2000PSI~15000PSI
4. Nominal diameter: 4 1/16”(103mm)
5. Applicable media: oil, natural gas, mud, and gas containing H2S and CO2
6. Working temperature: -46℃~121℃ (Class LU)
7. Material level:AA、BB、CC、DD、EE、FF、HH
8. Specification level: PSL1-4
9. Performance level: PR1~2

Executive standard

API 6A

Supply capability

Brand : JMP

Guarantee period : 24months

Enquiry Now
Two-way Self-operated Temperature Control Valve QPF SPF

4 sku

Two-way Self-operated Temperature Control Valve QPF SPF

Technical parameters

1. It needs no external power and convenient to use and maintain.

Executive standard

CB/T3389-92

Supply capability

Brand : NTEC

Guarantee period : 12 months from the date of delivery

Enquiry Now
5 MPa Electronic Electric Cage type double seat Regulating valve

1 sku

5 MPa Electronic Electric Cage type double seat Regulating valve

Technical parameters

1. Nominal diameter (mm): 40-100
2. Type: straightway double-seat casting ball valve
3. Nominal pressure: 2, 5, 10 MPa
4. Flange connection: FF, RF, RJ, LG
5. Flange standard: JIS B2201-1981 or ANSI B16.5-1981, GB/T9112-9124-9124-2000, HG20592-2009, etc
6. Welding connection: scarf welding SW (40-50 mm) and butt welding BW (65-100 mm)
7. Material: cast iron (HT200), carbon copper (ZG25), stainless copper (CGlCr18Ni9 and 0 zgocr17n112m02), chrome aluminum copper (1.25Cro.5Mo, 5.OCr.0.5 Mo, or SCPH21, SCPHei), titanium (TI).
8. Upper cover: normal temperature type (P) : - 17~+230℃; elongation l (E1) - 45~+17℃. 230-566℃ elongation type II (E2): integral (E21): -100~+350℃; welded (E2W); - 196~-100℃; corrugated pipe seal (B) : welded (BD): -50~+350℃; shaped (BF) : -30~+300℃
9. Gland type: bolt clamping
10. Packing: v-type PTFE filler, containing polytetrachene-soaked asbestos filler, asbestos braided filler

Executive standard

JB/T7387-2014

Supply capability

Brand : HENGHE

Guarantee period : 12 months

Enquiry Now
6.4 MPa Pneumatic Diaphragm Small Flow Regulating Valve

1 sku

6.4 MPa Pneumatic Diaphragm Small Flow Regulating Valve

Technical parameters

1. Nominal diameter (mm): G1/2", G3/4"
2. Seat diameter (mm) : 1.5*, 3, 4, 5, 6, 7, 8, 9
3. Flow coefficient Kv: 0.025, 0.08, 0.12, 0.20, 0.32, 0.50, 0.80, 1.00
4.6.4, ,10 MPa, standard products
5. Upper guide core form: single-seat plunger
6. Flow characteristics: linear type
7. Mode of action: air-to-open and air-to-close
8. Operating temperature: common type +40~+230℃, fin type +230~+450℃,
9. Actuator: ZHA/B multi-spring pneumatic diaphragm actuator
10. Accessory: positioner, solenoid valves, air filter regulator, limit switch, valve position feedback device, emergency actuating device, hand wheel, etc.

Executive standard

GB/T 4213-2008

Supply capability

Brand : HENGHE

Guarantee period : 12 months

Enquiry Now
Electric Diaphragm Regulating Valve

1 sku

Electric Diaphragm Regulating Valve

Technical parameters

1. Nominal diameter (mm): DN15-250
2. Rated flow coefficient Kv: 8-2,000
3. Nominal pressure (MPa): 1.0
4. Travel (mm) : 10-60
5. Approximate flow characteristic: approximate quick opening (adjustable)
6. Use temperature: -50℃~+120℃, -50℃~+150℃
7. Flange dimensions: cast iron flange subjected to JB78-59, cast steel flange according to JB79-59 and HG20592-2009
8. Electric actuator model to be matched with: PSL - 201 - PSL321, 361L, 361LSA - 08 361LXA-08 361LSA-20 361 LSB-30 361 LSB - 50 361LSC-65 explosion-proof type 361LXA-20 361LXB-30 361LXB-50
9. Allowable differential pressure (MPa) : 1.0-0.057

Executive standard

Corporate Standard

Supply capability

Brand : HENGHE

Guarantee period : 12 months

Enquiry Now
JLG70/46 fixed restrictive valve

16 sku

JLG70/46 fixed restrictive valve

Technical parameters

Nominal diameter: 1-13/16";
Working pressure: 2000-10000 psi;
Working temperature: - 46°C~+ 121°C (level LU);
Material grade: AA, BB, CC, DD, EE, FF, HH;
Specification level: PSL1-4;
Performance level: PR1-2;
Structural length: API 6 A;
Connecting end: API 6 A;
Test standard: API 6 A;
Fields of application: water, oil, and nature gas;

Executive standard

API 6A

Supply capability

Brand : CEPAI

Guarantee period : 12 Months

Enquiry Now
1.6 MPa Pneumatic Diaphragm Double-seat Regulating Valve

1 sku

1.6 MPa Pneumatic Diaphragm Double-seat Regulating Valve

Technical parameters

1. Nominal diameter (mm): 25-300
2. Valve seat diameter (mm): 25-300
3. Flow coefficient: 10-1,600
5. Adjustable scope: 30:1
6. Nominal pressure: 1.6, 4.0, 6.4 MPa
7. Flow characteristics: linear type, logarithm
8. Valve core form: double-seat plunger
9. Mode of action: air-to-open and air-to-close
10. Actuator: ZHA/B multi-spring pneumatic diaphragm actuator
11. Accessory: positioner, solenoid valves, air filter regulator, limit switch, valve position feedback device, emergency actuating device, hand wheel, etc.
12. Working temperature: common type -40~+230℃, special ordering goods +450~+600℃
13. Flange standard: JB78-59, JB79-59, or to be ordered as per JB/T79.1-94, JB/T79.2-94, HG20592-2009, ANSI, JIS, DIN, etc

Executive standard

GB/T 4213-2008

Supply capability

Brand : HENGHE

Guarantee period : 12 months

Enquiry Now