P-14 Series Thermal Resistance Signal Isolator

6 sku

P-14 Series Thermal Resistance Signal Isolator

Technical parameters

1. Thermal resistance exciting current: 800uA;
1. Output impedance: voltage type≥10KΩ, current type≤550Ω;
3. Accuracy: ±0.2%F.S
4. Temperature coefficient: <50ppm/℃;
5. Ambient temperature: -10℃-+60℃;
6. Insulation resistance: power supply, input, output ≥100MΩ (500VDC);
7. Insulation strength: power supply, input, output 1500VAC/min;
8. Power supply: 24VDC±10%;
9. Consumption power: <1W.

Executive standard

Company standard

Supply capability

Brand : PARAGON TECHNOLOGY

Guarantee period : 12 months from the date of delivery

Enquiry Now
P-17 Frequency Transmitter

5 sku

P-17 Frequency Transmitter

Technical parameters

1. Frequency range: 0.1Hz-100KHz (cut off as 0Hz for signal lower than 0.1Hz);
2. Input: pulse square wave, sine wave;
3. Accuracy: ±0.2% final value;
4. Temperature coefficient: 50ppm/K measured value / 100Ω load;
5. Ambient temperature: -10℃-+60℃;
6. Voltage withstand strength: over 100MΩ at 2500VDC, 1500VAC/ min;
7. Power supply: 24VDC±10%;
8. Consumption power: <1W;
9. Shell material: nylon PA.66;
10. Weight: about 65g;
11. Boundary dimensions (thickness x width x height): 25x98x41mm.

Executive standard

Company standard

Supply capability

Brand : Paragon

Guarantee period : 12 months from the date of delivery

Enquiry Now
PA-4067 Guide Rail Installation Analog Quantity Output Isolator (One-in One-out)

1 sku

PA-4067 Guide Rail Installation Analog Quantity Output Isolator (One-in One-out)

Technical parameters

1. Number of channels: one channel;
2. Power supply: 18-30VDC;
3. Consumption power: <2W;
4. Input signal: 4-20mA;
5. Output signal: 4-20mA;
6. Output impedance: 0-500Ω;
7. Response time: <0.05s (0-90%) (TYP);
8. Ripple: <10mVrms;
9. Transmission error: 0.1% final value;
10. Temperature coefficient: 50ppm/K measured value / 100Ω load;
11. Insulation resistance: over 100MΩ at 500VDC;
12. Isolation strength: 1500VAC/min;
13. Electromagnetic compatibility: meet the requirements of GB/T18268 industrial equipment application (equivalent to IEC61326-1);
14. Operating temperature: -10℃-+60℃;
15. Operating humidity: <90%RH (no condensate water);
16. Shell material: PC flame-resistant;
17. Weight: about 100g;
18. Boundary dimensions (thickness x width x height): 15x101x123mm.

Executive standard

Company standard

Supply capability

Brand : PARAGON TECHNOLOGY

Guarantee period : 12 months from the date of delivery

Enquiry Now
Fiberglass Moulded Grating 50*50*50

2 sku

Fiberglass Moulded Grating 50*50*50

Technical parameters

1. Fiberglass grating thickness: 50 mm; aperture: 50 * 50 mm; bearing rib thickness: 7 mm upper 5 mm lower;
2. Maximum size: 1525*4000 mm;
3. Unit weight: 21.7 kg/m2;
4. Resin material: m-phenylene, vinyl;
5. Color: common colors are green, yellow, gray, etc., and can also be customized.

Executive standard

JC/T1026-2007

Supply capability

Brand : MEIGU

Guarantee period : 12 months from the date of delivery

Enquiry Now
G-212 AC Signal Distributor

8 sku

G-212 AC Signal Distributor

Technical parameters

1. Input impedance: voltage type≥100KΩ, current type≤100Ω;
2. Output load: 0-500Ω;
3. Accuracy: ±0.2% final value;
4. Temperature coefficient: 50ppm/K measured value / 100Ω load;
5. Ambient temperature: -10℃-+60℃;
6. Voltage withstand strength: over 100MΩ at 2500VDC, 1500VAC/ min;
7. Power supply: 24VDC±10%;
8. Consumption power: <2W;
9. Shell material: nylon PA.66;
10. Weight: about 120g;
11. Boundary dimensions (thickness x width x height): 22.5x99x114.5mm.

Executive standard

Company standard

Supply capability

Brand : Paragon

Guarantee period : 12 months from the date of delivery

Enquiry Now
P-04 Passive AC Signal Isolator

8 sku

P-04 Passive AC Signal Isolator

Technical parameters

1. Input impedance: voltage type≥100KΩ, current type≤2Ω;
2. Output load: 0-500Ω (when internal power at 24V DC at port);
3. Accuracy: ±0.2% final value;
4. Temperature coefficient: 50ppm/K measured value / 100Ω load;
5. Ambient temperature: -10℃-+60℃;
6. Voltage withstand strength: over 100MΩ at 2500VDC, 1500VAC/ min;
7. Two-wire system power supply: 24VDC (internal power at port):
8. Shell material: nylon PA.66;
9. Weight: about 65g;
10. Boundary dimensions (thickness x width x height): 25x98x41mm.

Executive standard

Company standard

Supply capability

Brand : PARAGON TECHNOLOGY

Guarantee period : 12 months from the date of delivery

Enquiry Now
PA-4046 Guide Rail Installation Analog Quantity Input Isolator (Two-in Two-out)

1 sku

PA-4046 Guide Rail Installation Analog Quantity Input Isolator (Two-in Two-out)

Technical parameters

1. Number of channels: two channels;
2. Power supply: 18-30VDC;
3. Consumption power: <2W;
4. Input signal: 4-20mA;
5. Input impedance: ≤100Ω;
6. Distribution voltage: at open circuit ≤28V; at 20mA ≥16V;
7. Output signal: 4 ~ 20mA;
8. Output impedance: 0-500Ω;
9. Response time: <0.05s (0-90%) (TYP);
10. Ripple: <10mVrms;
11. Transmission error: 0.1% final value;
12. Temperature coefficient: 50ppm/K measured value / 100Ω load;
13. Insulation resistance: over 100MΩ at 500VDC;
14. Isolation strength: 1500VAC/min;
15. Electromagnetic compatibility: meet the requirements of GB/T18268 industrial equipment application (equivalent to IEC61326-1);
16. Operating temperature: -10℃-+60℃;
17. Operating humidity: <90%RH (no condensate water);
18. Shell material: PC flame-resistant;
19. Weight: about 100g;
20. Boundary dimensions (thickness x width x height): 15x101x123mm.

Executive standard

Company standard

Supply capability

Brand : Paragon

Guarantee period : 12 months from the date of delivery

Enquiry Now
PA-4112 Guide Rail Installation Switch Quantity Signal Isolator (Two-in Two-out)

1 sku

PA-4112 Guide Rail Installation Switch Quantity Signal Isolator (Two-in Two-out)

Technical parameters

1. Number of channels: two channels;
2. Working power supply: 18-30VDC;
3. Consumption power: <2W;
4. Power supply voltage at site sensor side: about 8V (at open circuit);
5. Passive switch input (dry contact signal):
Short-circuit current: 8mA;
Open-circuit voltage: 8V.
6. Active switch input (current signal):
When the site input current >2.1mA, it means "ON";
When the site input current <1.2mA, it means "OFF";
7. Switch hysteresis: 200us;
8. Relay output characteristics:
Response time: 20ms;
Drive capacity: 250VAC/2A, 30VDC/2A
9. Load type: resistive load;
10. Insulation strength: 1500VAC/min;
11. Operating temperature: -10℃-+60℃;
12. Operating humidity: <90%RH (no condensate water);
13. Shell material: PC flame-resistant;
14. Weight: about 100g;
15. Boundary dimensions (thickness x width x height): 15x101x123mm.

Executive standard

Company standard

Supply capability

Brand : PARAGON TECHNOLOGY

Guarantee period : 12 months from the date of delivery

Enquiry Now
Fiberglass Moulded Grating 38*38*38

2 sku

Fiberglass Moulded Grating 38*38*38

Technical parameters

1. Fiberglass grating thickness: 38 mm; aperture: 38 * 38 mm; bearing rib thickness: 7 mm upper 5 mm lower;
2. Maximum size: 1525*4000 mm;
3. Unit weight: 19.1 kg/m2;
4. Resin material: m-phenylene, vinyl;
5. Color: common colors are green, yellow, gray, etc., and can also be customized.

Executive standard

JC/T1026-2007

Supply capability

Brand : MEIGU

Guarantee period : 12 months from the date of delivery

Enquiry Now
G-112 DC Signal Distributor

8 sku

G-112 DC Signal Distributor

Technical parameters

1. Input impedance: voltage type≥100KΩ, current type≤100Ω;
2. Output load: 0-500Ω;
3. Accuracy: ±0.2% final value;
4. Temperature coefficient: 50ppm/K measured value / 100Ω load;
5. Ambient temperature: -10℃-+60℃;
6. Voltage withstand strength: over 100MΩ at 2500VDC, 1500VAC/ min;
7. Power supply: 24VDC±10%;
8. Consumption power: <2W;
9. Shell material: nylon PA.66;
10. Weight: about 120g;
11. Boundary dimensions (thickness x width x height): 22.5x99x114.5mm.

Executive standard

Company standard

Supply capability

Brand : PARAGON TECHNOLOGY

Guarantee period : 12 months from the date of delivery

Enquiry Now